KELVINATOR 2 TON SPLIT TYPE AC (WITH INSTALLATION)
- 2 Year COMPRESSOR Guarantee
- 2 Year Best Service Warranty
- Free 10 feet copper pipe
- EMI System Available
- Cash On Home Delivery ( Dhaka City…চার্জ প্রযোজ্য )
- ঢাকার বাইরে কুরিয়ার সার্ভিসের মাধ্যমে নিতে পারবেন! **চার্জ প্রযোজ্য **
Details : +8801880162323
-
Price: ৳51870
-
Status: Out Of Stock
Type : Split AC
Cooling Capacity : 24000Btu/h
Cooling Input : 2280(W), EER Cooling-2.8, Rated Current- 12.5 A
Power supply : 1-230-50 Ph-V-Hz
Excessive Operating : Discharge 2.6mpa
Refrigerant : R22/1280gms
Indoor indoor Air flow : 950 m³/h
Indoor Noise level (Hi/Mi/Lo) : 46 dB (A)
Input fan motor : Max. 60 W
Motor Speed (Hi/Mi/Lo) : 1000/900/700 r/min.
Outdoor Fan Speed : 3200 r/min
Outdoor tube outside dia and type: 9.5 inner groove tube
Outdoor noise level: max. : 58 dB(A)
Moisture Removal : 2.5-3 Lph
Operation Temperature : 18 - 46?C
Indoor Dimension (W x D x H) : 1030X320X247 mm
Outdoor Dimension (W x D x H): 860X660X310 mm
Piping Size Ref. Piping Size : 9.52mm (3/8 Inch), 15.88mm (5/8 Inch)
(Indoor & Outdoor)
Power Source : 220240v~50hz,1ph
Standard Rating : Current -9.8A & Input- 2210W
Conditions Cooling
Design Pressure : HP. PS- 2.9MPa
Design Pressure : LP. PS- 0.65MPa
Out Door Unit : IPX4
Buy Kelvinator AC on Ponnobd Electronics
|
Kelvinator AC Model |
|
KELVINATOR 2 TON SPLIT TYPE AC (WITH INSTALLATION) |
Popular Brands: Pentanik AC | General AC | Samsung AC | Midea AC | Walton AC | Singer AC | Sharp AC | Gree AC | LG AC | Marcel AC | Rangs AC | Panasonic AC | Jamuna AC | Haier AC | Carrier AC | Eco AC | Chigo AC
Kelvinator 2 Ton Split Type AC (With Installation)
The Kelvinator 2 Ton Split Type AC (With Installation) is a 24,000 BTU split air conditioner listed for customers who need high-capacity cooling for comparatively larger indoor spaces. The Ponnobd product specification identifies a cooling input of 2280W, an EER of 2.8, 230V/50Hz single-phase power, 950 m³/h indoor airflow and R22 refrigerant with a listed charge of 1280g. Indoor noise is specified at 46 dB(A), while maximum outdoor noise is 58 dB(A).
For buyers comparing the Kelvinator 2 Ton AC price in Bangladesh, this model combines substantial cooling capacity with a conventional split-system configuration. Its indoor and outdoor units are connected through refrigerant piping, allowing the main outdoor components to remain outside while conditioned air is distributed from the wall-mounted indoor unit.
The supplied Ponnobd listing does not display a specific Kelvinator model number, so no model number should be assumed for this product. Buyers looking for other current Kelvinator capacities and configurations can explore the Kelvinator AC collection in Bangladesh.
24,000 BTU Cooling Capacity for High-Capacity Applications
This Kelvinator split AC has a listed cooling capacity of 24,000 BTU per hour, which places it in the 2 Ton air-conditioner class. A 2 Ton AC is generally considered when a room requires substantially more cooling capacity than a typical 1 Ton or 1.5 Ton unit.
Room dimensions alone should not determine the correct AC capacity. Direct sunlight, top-floor heat, ceiling height, windows, insulation, number of occupants and heat-producing equipment can all affect the actual cooling requirement. Customers who are unsure whether 2 Ton is necessary can compare the 1.5 Ton AC range in Bangladesh before making a decision.
Within the same brand, the Kelvinator 1.5 Ton Split Type AC provides a lower-capacity alternative, while the Kelvinator 1 Ton Split Type AC is relevant when the cooling requirement is considerably smaller.
Power Consumption, EER and Electrical Requirements
The product page lists a cooling input of 2280W, an EER cooling rating of 2.8 and a rated current figure of 12.5A in its main cooling specification. A separate standard-rating section lists 2210W input and 9.8A current. These figures should be considered according to the operating or rating condition under which they are specified rather than treated as interchangeable measurements.
The listed electrical supply is approximately 230V, 50Hz, single phase, which corresponds to the conventional residential mains format used for many high-capacity split AC installations in Bangladesh. Because a 2 Ton air conditioner places a meaningful electrical load on the circuit, the electrical connection, breaker capacity, wiring and earthing should be evaluated by a qualified technician according to the actual installation conditions.
Customers whose priority is an explicitly identified inverter system can compare the Kelvinator 1.5 Ton Golden Premium Series Inverter AC or a related 2 Ton alternative such as the Carrier Inverter 2 Ton 24CRI Split Type Air Conditioner. The supplied Kelvinator 2 Ton installation listing itself does not clearly identify its compressor technology as inverter or fixed-speed, so that specification should not be assumed.
950 m³/h Airflow and Specified Noise Levels
The indoor unit is rated for approximately 950 m³/h airflow. Higher airflow helps distribute cooled air across the occupied space, although effective room cooling also depends on indoor-unit placement, furniture layout, airflow obstructions and the overall heat load.
The listed indoor noise level is 46 dB(A), while maximum outdoor noise is stated as 58 dB(A). The indoor fan motor is rated at a maximum of 60W, with listed motor speeds of 1000, 900 and 700 rpm for high, medium and low settings. These multiple fan-speed values allow airflow to be adjusted according to the required cooling and comfort level.
Moisture Removal for Humid Conditions
The product specification lists a moisture-removal capacity of approximately 2.5–3 litres per hour. Dehumidification is particularly relevant when an air conditioner operates in warm, humid conditions because indoor comfort depends on both temperature and humidity.
The listed operating-temperature range is approximately 18°C to 46°C. Actual cooling performance will still vary according to outdoor temperature, room heat gain, thermostat setting, installation quality, filter cleanliness and equipment condition.
R22 Refrigerant, Refrigerant Piping and Outdoor Protection
The supplied Ponnobd specification identifies the refrigerant as R22 with a listed charge of 1280g. Customers should confirm current refrigerant servicing and maintenance support when purchasing or arranging installation, particularly because refrigerant type is important for future servicing.
The listed refrigerant piping sizes are 9.52 mm (3/8 inch) and 15.88 mm (5/8 inch). The product page also states that 10 feet of copper pipe is supplied under its current promotional information. Because installation requirements vary from property to property, additional pipe length, drainage work, brackets, electrical work or other installation materials should be confirmed before ordering.
The outdoor unit carries a listed IPX4 water-protection classification. Correct outdoor-unit positioning remains important: installation should provide sufficient ventilation and service clearance while following the manufacturer's installation requirements.
Indoor and Outdoor Unit Dimensions
Planning the installation location before purchasing a 2 Ton split AC can help avoid clearance and placement problems. The Kelvinator listing provides the following dimensions:
| Specification | Listed Value |
|---|---|
| Product Type | Split Air Conditioner |
| Cooling Capacity | 24,000 BTU/h |
| Cooling Input | 2280W |
| EER Cooling | 2.8 |
| Listed Rated Current | 12.5A |
| Power Supply | 230V, 50Hz, Single Phase |
| Refrigerant | R22 / 1280g |
| Indoor Airflow | 950 m³/h |
| Indoor Noise | 46 dB(A) |
| Outdoor Noise | Maximum 58 dB(A) |
| Indoor Fan Motor | Maximum 60W |
| Indoor Fan Speed | 1000 / 900 / 700 rpm |
| Outdoor Fan Speed | 3200 rpm |
| Moisture Removal | 2.5–3 L/h |
| Operating Temperature | 18°C–46°C |
| Indoor Unit Dimensions | 1030 × 320 × 247 mm |
| Outdoor Unit Dimensions | 860 × 660 × 310 mm |
| Refrigerant Piping | 9.52 mm (3/8 inch) and 15.88 mm (5/8 inch) |
| Standard Rating Current | 9.8A |
| Standard Rating Input | 2210W |
| Outdoor Protection | IPX4 |
Which Kelvinator AC Capacity Should You Choose?
The correct capacity depends on the actual cooling load rather than brand or price alone. Customers dealing with a smaller bedroom or office should avoid automatically choosing a 2 Ton unit without calculating the required capacity. The Kelvinator 1.5 Ton AC may be more appropriate where approximately 18,000 BTU capacity is sufficient.
For buyers who specifically need a 24,000 BTU Kelvinator option, Ponnobd also lists another Kelvinator 2Ton Split Type AC with a different published specification set. Comparing both listings is useful because refrigerant type, airflow, power ratings and physical dimensions may vary between Kelvinator 2 Ton products.
You can also explore the broader 2 Ton AC price in Bangladesh collection to compare different brands and technologies within the same cooling-capacity segment. Ponnobd's current 2 Ton category contains split, inverter, fixed-speed and other configurations.
Alternative 2 Ton Split AC Options
Customers comparing specifications rather than choosing only by brand can review the Chigo 2 Ton AC, another 24,000 BTU split-system option available in Ponnobd's AC catalogue. Buyers who prefer Gree can compare the Gree 2 Ton Split AC GS 24CZ8S.
Another relevant 2 Ton comparison is the Panasonic 2 Ton Split Air Conditioner CS-VC24VKY-81. Comparing these alternatives can help buyers evaluate refrigerant type, compressor technology, rated power consumption, airflow, noise level, dimensions and purchase price rather than relying only on tonnage.
Customers who want to browse across capacities and brands can also visit the wider AC price in Bangladesh collection.
Benefits and Practical Uses in Bangladesh
- 24,000 BTU cooling: Provides high cooling capacity for spaces with a substantial cooling requirement.
- Split-system design: Keeps the primary outdoor components outside the occupied room.
- 950 m³/h airflow: Supports distribution of conditioned air throughout the room.
- Multiple indoor fan speeds: Listed high, medium and low motor speeds provide different airflow settings.
- Moisture removal: The published 2.5–3 L/h moisture-removal specification is relevant in humid conditions.
- IPX4 outdoor protection: The outdoor unit carries a specified water-protection rating.
- Installation-oriented listing: The product is marketed as a version supplied with installation-related provisions, including a stated 10 feet of copper pipe.
This capacity can be considered for larger bedrooms, drawing rooms, living areas, offices, meeting rooms, shops and similar environments when a proper cooling-load assessment indicates that approximately 24,000 BTU is required. A professional capacity assessment is preferable to choosing an AC solely from a general room-size chart.
Kelvinator 2 Ton Split AC Price in Bangladesh
The listed Kelvinator 2 Ton Split Type AC price in Bangladesh is BDT 51,870 on the supplied Ponnobd product page at the time of verification. The page currently shows the product as Out of Stock. Product prices, availability and promotional conditions can change, so customers should check the live product page before making a purchase decision.
The product title refers to installation, and the listing currently mentions 10 feet of copper pipe. However, buyers should confirm the exact installation scope, additional piping charges, electrical requirements, outdoor-unit mounting requirements and any other site-specific costs before ordering.
Buy Kelvinator 2 Ton Split Type AC in Bangladesh from Ponnobd
If you need a 24,000 BTU split air conditioner and the published Kelvinator specifications suit your cooling requirement, check the current availability and purchase conditions through Ponnobd Electronics. Before ordering, confirm the current price, stock, installation scope, refrigerant servicing, electrical requirements and written warranty conditions.
The product page contains promotional text referring to compressor and service coverage, while its quick-summary warranty field displays “N/A.” For that reason, customers should obtain the current written warranty terms from Ponnobd before purchase rather than relying on an assumed warranty period.
Frequently Asked Questions
What is the cooling capacity of the Kelvinator 2 Ton Split Type AC?
The Kelvinator 2 Ton Split Type AC on this Ponnobd listing has a specified cooling capacity of 24,000 BTU per hour. This places it in the 2 Ton cooling category. Whether 24,000 BTU is suitable for a particular room depends on room dimensions, ceiling height, sunlight exposure, insulation, occupants and other sources of heat.
What is the model number of this Kelvinator 2 Ton AC?
The supplied Ponnobd product page does not display a specific model number for the Kelvinator 2 Ton Split Type AC (With Installation). Because other Kelvinator 2 Ton models have different specifications, a model number should not be guessed. Buyers who require an exact model reference should confirm it with Ponnobd before ordering.
Is this Kelvinator 2 Ton AC an inverter model?
The supplied product listing identifies the unit as a split air conditioner but does not clearly state whether its compressor system is inverter or fixed-speed. Therefore, it should not be advertised as an inverter AC without additional verified documentation. Customers specifically looking for inverter technology should compare products that clearly identify inverter operation in their specifications.
Which refrigerant does the Kelvinator 2 Ton Split AC use?
The supplied Ponnobd specification lists R22 refrigerant with a charge of 1280g. Since refrigerant type affects installation and future servicing, customers should confirm current maintenance and refrigerant support before purchasing, particularly if long-term serviceability is an important consideration.
How much electricity does this Kelvinator 2 Ton AC use?
The product specification lists a cooling input of 2280W and EER Cooling of 2.8. A separate standard-rating section lists 2210W input and 9.8A current. Actual electricity consumption will vary with operating time, thermostat setting, outdoor temperature, room heat load, installation quality, filter condition and compressor operating behaviour.
Does the Kelvinator 2 Ton AC come with installation?
The product is titled Kelvinator 2 Ton Split Type AC (With Installation), and the current page also mentions 10 feet of copper pipe. However, the exact scope of installation is not fully detailed in the supplied specification. Buyers should confirm whether brackets, additional piping, drainage, electrical work or other site-specific materials involve additional charges.
What warranty is available with this Kelvinator AC?
The product page contains promotional text referring to compressor and service coverage, but its quick-summary section currently shows the warranty field as “N/A.” Because these two areas are inconsistent, the safest approach is to confirm the current written compressor, parts and service warranty directly with Ponnobd before completing the purchase.
What is the current Kelvinator 2 Ton AC price in Bangladesh?
At the time of verification, Ponnobd lists this Kelvinator 2 Ton Split Type AC at BDT 51,870 and shows the product as Out of Stock. Price, promotional benefits and availability may change, so customers searching for the latest Kelvinator 2 Ton AC price in Bangladesh should check the live product page before ordering.
Content prepared according to the supplied SEO, AEO, factual-verification and internal-linking requirements.
- 2 Year COMPRESSOR Guarantee
- 2 Year Best Service Warranty
- Free 10 feet copper pipe
- EMI System Available
- Cash On Home Delivery ( Dhaka City…চার্জ প্রযোজ্য )
- ঢাকার বাইরে কুরিয়ার সার্ভিসের মাধ্যমে নিতে পারবেন! **চার্জ প্রযোজ্য **